Chiptuning files » ECU and TCU » Siemens/Continental EMS3125 » Stage 2 BASE

Stage 2 BASE for Siemens/Continental EMS3125

Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.

Stage 2 BASE files for vehicles with Siemens/Continental EMS3125

15 of the 18 vehicles with this unit

Vehicle	Generation	Fuel	Power	Stage 2
Clio 1.2 16v	IV Facelif 2016 2019	Petrol	75 hp
Clio 0.9 TCE	IV Facelif 2016 2019	Petrol	75 hp
Clio 0.9 TCE (Siemens Injection)	IV Facelif 2016 2019	Petrol	75 hp
Clio 0.9 TCE	IV Facelif 2016 2019	Petrol	90 hp
Clio 0.9 TCE (Siemens Injection)	IV Facelif 2016 2019	Petrol	90 hp
Clio 1.2 TCE	IV Facelif 2016 2019	Petrol	120 hp
Clio 1.2 16v	IV 10/2012 2016	Petrol	75 hp
Clio 0.9 TCE	IV 10/2012 2016	Petrol	90 hp
Megane 1.3 TCE	Megane 4 (ph1) 2015 - 2021	Petrol	116 hp
Megane RS Trophy R 2.0T	Megane 3 (ph3) 2014 - 2015	Petrol	275 hp	320 hp / 460 Nm
Megane RS 2.0T	Megane 3 (ph3) 2014 - 2015	Petrol	275 hp	317 hp / 457 Nm
Megane RS Trophy - 2.0T	Megane 3 (ph3) 2014 - 2015	Petrol	275 hp	321 hp / 461 Nm
Megane RS 2.0T	Megane 3 (ph1) 2008 - 2012	Petrol	250 hp	321 hp / 461 Nm
Modus 1.2 16v	2004 - 2012	Petrol	75 hp
Sandero 0.9L Energy TCe 5MT	2009	Petrol	90 hp

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Other modifications for Siemens/Continental EMS3125

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.