Chiptuning files » Volvo » XC 90 » II 2015 2019 » 2.0 T6 (320 hp / 400 Nm)

Chiptuning files for Volvo XC 90 II 2015 2019 2.0 T6 (320 hp)

ECU: Denso MB279700 / Denso VEA

StockStage 1 (+ 23 HP)Stage 2 (+ 48 HP)

320 HPstock power

400 Nmstock torque

239 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Volvo XC 90 2.0 T6 (320 hp): Software-only remap for a car with standard hardware. 320 hp to 343 hp and 400 Nm to 478 Nm.
Stage 2 BASE for Volvo XC 90 2.0 T6 (320 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 320 hp to 368 hp and 400 Nm to 478 Nm.
E85 or other special fuels modification for Volvo XC 90 2.0 T6 (320 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
VMAX speedlimit on/off higher/lower for Volvo XC 90 2.0 T6 (320 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Volvo XC 90 2.0 T6 (320 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Volvo XC 90 2.0 T6 (320 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 to 80 credits (€98 to €112), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, OBD after bench unlock	–
Alientech KESS3	OBD, Bench, Boot	–
Alientech Powergate	OBD	–

Also listed for this vehicle: Flashtec CMD, Dimsport New Trasdata.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.