Chiptuning files » Volvo » XC 60 » II - Facelift 2021 2025 » 2.0 T8 Twin Engine (390 hp / 640 Nm)

Chiptuning files for Volvo XC 60 II - Facelift 2021 2025 2.0 T8 Twin Engine (390 hp)

ECU: Denso VEP Gen2

390 HPstock power
640 Nmstock torque
291 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does
Stage 1 for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
Software-only remap for a car with standard hardware. 390 hp to 428 hp and 640 Nm to 697 Nm.
Stage 2 BASE for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Hardcut limiter for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Checksum Correction for Volvo XC 60 2.0 T8 Twin Engine (390 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Hardcut limiter65 credits (€91)+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Volvo XC 60 2.0 T8 Twin Engine tuning file

ECU and TCU files for the Volvo XC 60 II - Facelift 2021 2025 2.0 T8 Twin Engine (390 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol plug-in hybrid
Displacement
1969 cc
Stock power
390 hp / 291 kW
Stock torque
640 Nm
ECU
Denso VEP Gen2

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp