Chiptuning files » Volkswagen » Up! » 12/2011 2016 » 1.0i (60 hp / 95 Nm)

Chiptuning files for Volkswagen Up! 12/2011 2016 1.0i (60 hp)

ECU: Bosch ME17.5.20 / Bosch ME17.5.24 / Bosch ME17.5.26 / Bosch MG1CA811 / Bosch MG1CS811

StockStage 1 (+ 25 HP)

60 HPstock power

95 Nmstock torque

45 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Detuned engine: same hardware as the 1.0i 75 hp, limited in software

Available modifications

What each modification does

Stage 1 for Volkswagen Up! 1.0i (60 hp): Software-only remap for a car with standard hardware. 60 hp to 85 hp and 95 Nm to 105 Nm.
Stage 2 BASE for Volkswagen Up! 1.0i (60 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Volkswagen Up! 1.0i (60 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Volkswagen Up! 1.0i (60 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Volkswagen Up! 1.0i (60 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Volkswagen Up! 1.0i (60 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Volkswagen Up! 1.0i (60 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Volkswagen Up! 1.0i (60 hp): Start-stop is switched off by default.
Exhaust flap control/off for Volkswagen Up! 1.0i (60 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Volkswagen Up! 1.0i (60 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Volkswagen Up! 1.0i (60 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Volkswagen Up! 1.0i (60 hp): The secondary air injection system is switched off in software.
AGS off for Volkswagen Up! 1.0i (60 hp): The active grille shutters are switched off in software.
Readiness ok for Volkswagen Up! 1.0i (60 hp): Readiness monitors are set so the car reports ready at an emission inspection.
RPM Limit Mod for Volkswagen Up! 1.0i (60 hp): The engine speed limit is raised or lowered.
IMMO_OFF for Volkswagen Up! 1.0i (60 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Checksum Correction for Volkswagen Up! 1.0i (60 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 to 80 credits (€98 to €112), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	55 to 65 credits (€77 to €91), by model year	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Exhaust flap control/off	45 to 55 credits (€63 to €77), by model year	+ 45 credits (€63)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 to 50 credits (€56 to €70), by model year	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
AGS off	30 credits (€42)	+ 30 credits (€42)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
RPM Limit Mod	45 credits (€63)	included
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench	–
Magicmotorsport FLEX	Bench, Boot, OBD	–
Alientech KESS3	Bench, Boot	–
Flashtec CMD	OBD, Bench, Boot	–
PCMflash	OBD, Boot	–

Also listed for this vehicle: Alientech KESSv2, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Volkswagen Up! 1.0i tuning file

ECU and TCU files for the Volkswagen Up! 12/2011 2016 1.0i (60 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel: Petrol
Engine code: CHYA / CHY / DAFA
Displacement: 999 cc
Stock power: 60 hp / 45 kW
Stock torque: 95 Nm
ECU: Bosch ME17.5.20, Bosch ME17.5.24, Bosch ME17.5.26, Bosch MG1CA811, Bosch MG1CS811