Chiptuning files » Mercedes-Benz » Citan » 2012 2016 » 109 CDI (90 hp / 200 Nm)

Chiptuning files for Mercedes-Benz Citan 2012 2016 109 CDI (90 hp)

ECU: Bosch EDC17C42 / Bosch EDC17C84 / Bosch MD1CS006

90 HPstock power
200 Nmstock torque
67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Mercedes-Benz Citan 109 CDI (90 hp)
Software-only remap for a car with standard hardware. 90 hp to 115 hp and 200 Nm to 260 Nm.
Stage 2 BASE for Mercedes-Benz Citan 109 CDI (90 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 90 hp to 118 hp and 200 Nm to 260 Nm.
DTC off for Mercedes-Benz Citan 109 CDI (90 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Mercedes-Benz Citan 109 CDI (90 hp)
Start-stop is switched off by default.
Exhaust flap control/off for Mercedes-Benz Citan 109 CDI (90 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Mercedes-Benz Citan 109 CDI (90 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Mercedes-Benz Citan 109 CDI (90 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Mercedes-Benz Citan 109 CDI (90 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Mercedes-Benz Citan 109 CDI (90 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Mercedes-Benz Citan 109 CDI (90 hp)
The SCR / AdBlue system is switched off in software.
TVA off for Mercedes-Benz Citan 109 CDI (90 hp)
The throttle valve actuator is switched off in software.
AGS off for Mercedes-Benz Citan 109 CDI (90 hp)
The active grille shutters are switched off in software.
Torque monitoring off for Mercedes-Benz Citan 109 CDI (90 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Mercedes-Benz Citan 109 CDI (90 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
Hot start fix for Mercedes-Benz Citan 109 CDI (90 hp)
Corrects hard starting with a hot engine.
IMMO_OFF for Mercedes-Benz Citan 109 CDI (90 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Mercedes-Benz Citan 109 CDI (90 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Exhaust flap control/off45 to 55 credits (€63 to €77), by model year+ 45 credits (€63)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 to 45 credits (€49 to €63), by model year+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
TVA off40 credits (€56)+ 40 credits (€56)
AGS off30 credits (€42)+ 30 credits (€42)
Readiness ok45 credits (€63)+ 15 credits (€21)
Hot start fix35 to 45 credits (€49 to €63), by model year+ 35 credits (€49)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot, OBD–
Magicmotorsport FLEXBench, Boot, OBD–
Alientech KESS3OBD, Bench, Boot–
Alientech PowergateOBD–
Flashtec CMDOBD, Bench, Boot–
PCMflashBoot–

Also listed for this vehicle: Alientech KESSv2, Dimsport New Trasdata, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mercedes-Benz Citan 109 CDI tuning file

ECU and TCU files for the Mercedes-Benz Citan 2012 2016 109 CDI (90 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Engine code
OM607
Displacement
1461 cc
Stock power
90 hp / 67 kW
Stock torque
200 Nm
ECU
Bosch EDC17C42, Bosch EDC17C84, Bosch MD1CS006

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp