Technical Description of OBD-II Trouble Code
The control circuit for Pressure Control Solenoid C is experiencing low voltage
What does that mean?
This is a generic diagnostic trouble code (DTC) for transmissions and applies to OBD-II vehicles with automatic transmissions. This can include vehicles from various manufacturers such as Ford, GMC, Chevrolet, Honda, BMW, Saturn, Land Rover, Acura, Nissan, Saturn, etc. Although it is a generic code, the specific repair steps may vary depending on the year, make, model, and powertrain configuration of the vehicle.
Most automatic transmissions have at least three pressure control solenoids, known as solenoid A, B, and C. Newer transmissions may have more solenoids due to having more gears. The “C” solenoid control circuit is associated with various trouble codes, including P0968, P0969, P0970, and P0971. When the P0970 code is set, it means that the Powertrain Control Module (PCM) has detected a problem with the transmission pressure control solenoid “C” control circuit. The specific code set depends on the specific malfunction detected by the PCM.
An automatic transmission relies on bands and clutches that change gears by having fluid pressure in the correct place at the right time. The purpose of the transmission pressure control solenoids is to adjust the fluid pressure for the automatic transmission to operate properly and shift smoothly. The PCM monitors the pressure within the solenoids and directs fluid to various hydraulic circuits to precisely change the transmission gear ratio as needed.
Code P0970 is set by the PCM when it detects a low voltage condition in the pressure control solenoid “C” control circuit, indicating that it is not functioning properly.
Example of transmission solenoids:
What is the severity of this DTC?
This code typically starts as a moderate severity, but if not corrected in a timely manner, it can quickly progress to a more severe level. If the transmission bangs into gear, it can cause permanent internal damage, making the problem a severe issue.
What are some of the symptoms of the code?
Symptoms of a P0970 trouble code may include:
What are some of the common causes of the code?
Causes for this P0970 transmission code may include:
What are some P0970 troubleshooting steps?
Prior to beginning the troubleshooting process for any malfunction, it is recommended to research the Technical Service Bulletins (TSB’s) for the specific vehicle based on the year, model, and transmission. This can save a lot of time by providing guidance in the right direction.
Fluid & Wiring Inspections
The first step is to check the fluid level and examine the condition of the fluid for contamination. Before changing the fluid, it is advisable to check the vehicle records to verify the last time the filter and fluid were changed.
Next, perform a detailed visual inspection to check the condition of the wiring for any obvious defects. Check the connectors and connections for security, corrosion, and damaged pins. This should include all wiring and connectors related to the transmission pressure control solenoids, transmission pump, and PCM. Depending on the specific configuration, the transmission pump may be driven electrically or mechanically.
Advanced Steps
The advanced steps are highly vehicle-specific and require the appropriate advanced equipment for accurate performance. These procedures require a digital multimeter and the specific technical references for the vehicle. It is important to obtain the specific troubleshooting data for the vehicle before proceeding with the advanced steps. Voltage requirements and fluid pressure requirements may vary based on the specific model and transmission design.
Continuity Checks
Unless otherwise specified by the technical data, the normal readings for wiring and connections should be 0 ohms of resistance. Continuity checks should always be performed with the power removed from the circuit to avoid shorting the circuit and causing further damage. Resistance or no continuity indicates faulty wiring that is open or shorted and must be repaired or replaced.
What are some common repairs for this code?
Possible misdiagnosis may include:
Hopefully, the information in this article will help you correct the issue with your P0970 pressure control solenoid “C” control circuit diagnostic trouble code(s). This article is strictly for informational purposes, and the specific technical data and service bulletins for your vehicle should always take priority.
