Technical Description of OBD-II Trouble Code
The performance of the Transmission Park Position Sensor/Switch B Circuit is low.
What does that mean?
This is a generic diagnostic trouble code (DTC) that applies to OBD-II vehicles equipped with a transmission park position switch/sensor. This includes vehicles from various manufacturers such as Dodge, Ford, Toyota, Land Rover, VW, Chevrolet, etc. The exact repair steps may vary depending on the year, make, model, and powertrain configuration of the vehicle.
Trouble code P07BB is one of several codes associated with the Transmission Park Position Sensor/Switch “B” Circuit.
This code indicates that the Powertrain Control Module (PCM) has detected a malfunction in the transmission park position sensor/switch “B” circuit. Common codes associated with this circuit malfunction include P07B8, P07B9, P07BA, P07BB, P07BC, and P07BD. The specific code activated by the PCM will depend on the specific situation, and it will cause the check engine light or service engine soon light to illuminate.
The purpose of the transmission park position sensor/switch “B” circuit is to monitor the status of the transmission. This circuit sends a signal to the PCM when the transmission is in the park position. In many vehicles, this circuit serves as a safety feature to prevent the starter from engaging when the automatic transmission is in gear.
Code P07BB is set by the PCM when it detects low performance in the transmission park position sensor/switch “B” circuit.
What is the severity of this DTC?
The severity of this code varies depending on the specific malfunction, and it may become a safety issue if the starter engages while the vehicle is in gear. Therefore, it requires immediate attention.
Photo of a park/neutral position switch:
What are some of the symptoms of the code?
Symptoms of a P07BB trouble code may include:
What are some of the common causes of the code?
Causes for this P07BB code may include:
What are some P07BB troubleshooting steps?
The first step in troubleshooting any malfunction is to research the Technical Service Bulletins for known issues with the specific vehicle.
Locate all of the components associated with the transmission park position sensor/switch “B” circuit. This includes the transmission park position sensor/switch, wiring, connectors, and the PCM in a simplex system. Depending on the specific year, make, and model of the vehicle, this circuit may incorporate additional components. After locating these components, conduct a thorough visual inspection to check for any obvious defects such as scraping, rubbing, bare wires, or burn spots in the associated wiring and connectors. Also, check the connectors for corrosion buildup or damaged pins.
Advanced Steps
The advanced steps are highly specific to the vehicle and require advanced equipment for accurate performance. These procedures involve using a digital multimeter and referencing the specific technical references for the vehicle. The voltage requirements will vary based on the specific year, make, and model of the vehicle.
Circuit Checks
The voltage requirements for the transmission park position sensor/switch circuit and its components will vary depending on the specific vehicle and circuit configuration. Refer to the technical data to obtain the correct voltage range for the transmission park position sensor/switch and follow the appropriate troubleshooting sequence. If a sensor/switch has no voltage output despite receiving the correct voltage input, it is usually an indication of internal failure.
If this process identifies the absence of a power source or ground, continuity testing may be necessary to check the condition of the wiring and connectors. Continuity tests should always be performed with the power removed from the circuit, and the normal readings should be 0 ohms of resistance unless otherwise specified by the technical data. Resistance or no continuity indicates faulty wiring or connectors that are shorted or open and must be repaired or replaced.
Common Repairs
We hope that the information in this article has been helpful in addressing the problem with your transmission park position sensor/switch circuit. However, please note that this article is strictly informational, and the specific technical data and service bulletins for your vehicle should always take priority.
