Technical Description of OBD-II Trouble Code
The circuit downstream of the throttle valve in the turbocharger/supercharger inlet pressure sensor is registering a high pressure. This code is applicable to vehicles equipped with OBD-II and a turbocharger or supercharger inlet pressure sensor. It can be found in various vehicle brands such as Ford, Dodge, Saturn, Nissan, Subaru, Honda, etc. The specific repair steps may vary depending on the make, model, and engine of the vehicle.
This code indicates that there is a high condition in the Turbo/Supercharger Inlet Pressure Sensor (TCIP) circuit. The turbocharger/supercharger are responsible for increasing the amount of air (volumetric efficiency) in the combustion chamber by creating pressure in the intake system.
Turbochargers are typically exhaust driven, while superchargers are belt driven. The inlet of the turbocharger/supercharger is where they draw filtered air from the air filter. The inlet sensor works with the ECM (Electronic Control Module) or PCM (Powertrain Control Module) to monitor and regulate intake pressure.
The “(Downstream of throttle valve)” indicates the specific inlet sensor that is malfunctioning and its location. The pressure sensor may also include a temperature sensor.
This trouble code is closely related to P012A, P012B, P012C, and P012E.
What are some of the symptoms of the code?
Symptoms of a P012D engine code may include:
What are some of the common causes of the code?
The causes for this code may include:
What are some of the troubleshooting steps?
It is recommended to check for technical service bulletins (TSBs) for your vehicle. Accessing a known fix can save time and money during diagnosis.
One known bulletin is Ford TSB 14-0082, which applies to 2013 Ford F-150 pickups with the 3.5L EcoBoost V6 engine. If you have a P012B and/or P012D code with that vehicle, refer to the bulletin for the full details of the fix.
Some basic tools that are useful when working with electrical systems include an OBD code reader, multimeter, basic socket set, basic ratchet and wrench sets, basic screwdriver set, rag/shop towels, battery terminal cleaner, and a service manual.
When working on the vehicle, it is important to follow safety tips such as letting the engine cool, chalking the wheels, and wearing personal protective equipment.
Basic Step #1: Visually inspect the TCIP and its surroundings. Check the harness thoroughly, as it often runs along areas with high temperatures. Look for frayed, chafed, or cut wires that may be causing the issue. Inspect the pins of the sensor’s connector for corrosion. Also, inspect all ground straps and look for corroded or loose ground connections.
Basic Step #2: Check the fuse related to the circuit. Locate the fuse box in the car and ensure that the fuse fits tightly in the slot and is not blown.
Basic Tip #3: Inspect the air filter for signs of clogging or dirtiness. A clogged filter can cause a low pressure condition. If the air filter is clogged or damaged, it should be replaced. Check if the air filter is cleanable, as cleaning it may be an option instead of replacing the entire assembly.
Basic Step #4: If no malfunction is found, verify the circuit itself. Perform basic electrical tests on the circuit, such as checking for continuity, short to ground, and power. Any open or short indicates a problem that needs to be repaired.