P0575 Cruise Control Input Circuit

Technical Description of OBD-II Trouble Code

Circuit for Cruise Control Input

What does that signify?

This is a generic diagnostic trouble code (DTC) for the powertrain and is commonly found in OBD-II vehicles with cruise control. It can be applicable to various vehicle makes such as Chevrolet (Chevy), Toyota, Ford, Harley, Dodge, Ram, Ford, etc.

The ECM (Engine control module) is responsible for ensuring that the engine functions properly while maintaining acceptable levels of emissions, fuel economy, performance, noises, and comfort functions. Cruise control is a convenient feature for long trips as it eliminates the need to manually control the vehicle’s speed. However, if the cruise control system has any defects, the ECM may disable it completely, which can be indicated by the absence of the cruise control light on the dashboard when attempting to activate it.

In general, this trouble code indicates an electrical malfunction in the control input, which can have various potential causes. The P0575 Cruise Control Input Circuit and related codes (P0576 and P0577) are set when the ECM detects a non-specific general malfunction in the cruise control input circuit.

Cruise control switches:
P0575 Brake Switch

What is the severity of this DTC?

This particular code is considered a mild issue that does not require immediate repair. The engine performance will not be affected, allowing the vehicle to remain operational. The main problem associated with this code is the inability to use the cruise control function.

However, it is important to note that when the ECM displays a P0575 or any other P code, the vehicle may not pass an emissions test. Therefore, it is crucial to clear the code after every repair before undergoing a retest. Failing to do so may prevent the mechanic from accurately identifying the problem, potentially leading to more serious issues in the future.

What are some of the symptoms of the code?

The most common symptom of the P0575 code is the malfunction or complete failure of the cruise control system. Other possible symptoms include:

  • The check engine light (CEL) turning on after a few drive cycles once the ECM detects an issue
  • Erratic or intermittent operation of the cruise control function(s)
  • The cruise control light remaining constantly on or not illuminating at all
  • What are some of the common causes of the code?

    The causes of the P0575 cruise control code may include:

  • A faulty cruise control switch, often caused by spilled liquids that result in short circuits
  • Issues with the wiring (e.g., open circuit, short to ground, short to power, etc.)
  • Problems with the ECM (engine control module) such as internal shorts or opens
  • Open or shorted cruise control function switches
  • Damaged connectors within the cruise control system
  • Blown fuses, which may indicate more serious problems such as shorts, voltage spikes, or defective control modules
  • What are some diagnostic and troubleshooting steps for P0575?

    The first step in troubleshooting any malfunction is to consult the Technical Service Bulletins (TSB) for known issues specific to the vehicle.

    Advanced diagnostic steps will vary depending on the vehicle and may require specialized equipment and knowledge. The following basic steps are provided as a general guideline, but it is recommended to refer to a vehicle-specific repair guide for detailed instructions.

    Basic Step #1

    After recording the active P0575 code using an OBD-II DTC scanner, thoroughly inspect the vehicle’s connectors, wiring, and other components of the cruise control system. Replace, reconnect, or repair any damaged connectors, such as those with broken tabs, heat damage, or corrosion. Clear the code and perform a short test drive, checking the functionality of the cruise control. If the repair is successful, ensure that the check engine light no longer reappears. If the light does come back on and the code is stored in the ECM again, continue with further diagnostics.

    Basic Step #2

    Test the cruise control switch (also known as the multifunction switch) according to the procedures and desired values specified in the vehicle’s service manual. This typically involves using a digital volt-ohm meter (DVOM) or multimeter to measure electrical values. Compare the actual values to the manufacturer’s desired values to determine if the switch is the source of the problem.

    Basic Step #3

    If the switch is found to be defective, replacing it may require removing steering column covers or dealing with airbags. Follow the specific steps provided in the vehicle’s manual to replace the switch. After replacing the switch, clear any active codes and test drive the vehicle.

    This article is intended for informational purposes only, and it is always recommended to prioritize the technical data and service bulletins specific to your vehicle.

    Professional Service Options

    When facing p0575 error, you have two solutions:

    Option 1: Mechanical Repair (Recommended)

    We highly recommend solving this issue by repairing or replacing the faulty sensor, wiring, or related mechanical parts.
    This ensures your vehicle operates as designed.

    Option 2: Permanent p0575 DTC Deletion (Alternative)

    If mechanical repair is not possible, we offer a professional service to permanently delete p0575 trouble code (DTC) from your ECU.

    Instantly Fix Your DTC Problem – No Hardware Changes Needed!

    Get your p0575 code permanently deleted by our experts.

    ✅ Fast. ✅ Reliable. ✅ Keeps your vehicle running smoothly.

    🔥 Upload your ECU file and start now! 🔥

    Already a member? Log in here to submit your file!

    Tuning Files Service from ECUFILES

    Custom Tuning File Service

    EVC Reseller Database

    Automatic File Service

    Technical Questions
    For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

    Response time: Quick!

    Sales Questions
    For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

    Response time: Quick!

    For sales questions, you can also reach us at:

    WhatsApp: +31686247602

    Response time: Moderate!

    WhatsApp