Audi RSQ3 MED17.1.6 revised Stage 1 original 400hp to 448hp 530nm great powerband
Acceleration to 100 km / h achieved by the 570S is identical to the Porsche 991 Turbo with Sport + and is 3.2 seconds. The speedometer pointer with the accelerator pedal pressed to the floor will stop only after 328 km / h. Good performance is not only due to the low weight and powerful engine but also to the fast, 7-speed SSG transmission, from which the torque is transmitted to the rear wheels.
Audi RSQ3 MED17.1.6 revised Stage 1 original 400hp to 448hp 530nm great powerband
Our team at ECUFILES.com developed a revised stage 1 file for the Audi RSQ3 MED17.1.6.
VehicleType = Passenger car
VehicleProducer = Audi
VehicleSeries = RSQ3
VehicleBuild = 2020 …
VehicleModel = RS TFSI (2.5T GPF)
VehicleModelyear = 2020
Userdef1 = autotuner
Userdef2 = bootmode
EcuUse = Engine
EcuProducer = Bosch
EcuBuild = MED17.1.62
EcuProdNr = 83A907404 07K907309F 83A907404
EcuStgNr = 07K907309F 83A907404
EcuSoftwareVersion = 052832
EcuSoftwareVersionVersion = 0002
EngineName = DNWA
EngineType = Turbo-Petrol
EngineDisplacement = 2.5
EngineTransmission = dsg
OutputPS = 400.0
OutputKW = 294.0
Simply register to our portal and let us know what you need. You will receive ready to upload tuning files in less than 30 min. This will satisfy your customers to the max.
[sc name=”register_section_type_a” ]
Safe Tuning Files
Our tuning files are being developed with special care. Tuning an ECU file can be complicated and time-consuming. While we developed this special mod for Audi RSQ3 MED17.1.6 we make sure that our files are safe for the car and the driver.
The ECU (engine control unit) controls the most vital and expensive part of the vehicle, your engine. Our engineers have many years of experience. We tuned thousands of vehicles and know how to calibrate your engine correctly. Register and log in to our system to get professionally tuned ECU files for Audi RSQ3 MED17.1.6